These single row angular contact ball bearings, with 40° contact angle and non-contact seals on both sides, accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They have a ball-centred glass-fibre reinforced PA66 cage. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.
| d | 15 mm | Bore diameter |
|---|---|---|
| D | 42 mm | Outside diameter |
| B | 13 mm | Width |
| d1 | ≈ 26 mm | Shoulder diameter of inner ring (large side face) |
| d2 | ≈ 20.73 mm | Shoulder diameter of inner ring (small side face) |
| D2 | ≈ 33.8 mm | Recess diameter of outer ring (large side face) |
| D5 | ≈ 38.55 mm | Recess diameter of outer ring (small side face) |
| a | 18.6 mm | Distance side face to pressure point |
| r1,2 | min. 1 mm | Chamfer dimension |
| r3,4 | min. 0.6 mm | Chamfer dimension |
| da | min. 21 mm | Diameter of shaft abutment |
|---|---|---|
| da | max. 25.5 mm | Diameter of shaft abutment |
| Da | max. 36 mm | Abutment diameter housing |
| Db | max. 38 mm | Diameter of housing abutment |
| ra | max. 1 mm | Radius of fillet |
| rb | max. 0.6 mm | Radius of fillet |
| Basic dynamic load rating | C | 13 kN |
|---|---|---|
| Basic static load rating | C0 | 6.7 kN |
| Fatigue load limit | Pu | 0.28 kN |
| Reference speed | 22 000 r/min | |
| Limiting speed | 17 000 r/min | |
| Minimum axial load factor | A | 9.07E-4 |
| Minimum radial load factor | kr | 0.1 |
| Limiting value | e | 1.14 |
| Calculation factor (single, tandem) | X | 0.35 |
|---|---|---|
| Calculation factor (single, tandem) | Y0 | 0.26 |
| Calculation factor (single, tandem) | Y2 | 0.57 |
| Calculation factor (back-to-back, face-to-face) | X | 0.57 |
|---|---|---|
| Calculation factor (back-to-back, face-to-face) | Y0 | 0.52 |
| Calculation factor (back-to-back, face-to-face) | Y1 | 0.55 |
| Calculation factor (back-to-back, face-to-face) | Y2 | 0.93 |
General bearing specifications
Bearing interfaces
Can't find the information you're looking for? Please fill out the application form and we will reply to you as soon as possible.
Your local AKMI dealer can provide you with technical support and sales assistance.
AKMI online customer service, timely answer customer questions
(Monday to Friday 9:00-18:00)
