Double row full complement cylindrical roller bearings incorporate a maximum number of rollers and are therefore suitable for very heavy radial loads in combination with moderate speeds. Having three flanges on the inner ring and one flange on the outer ring, NNCF design bearings can accommodate limited axial displacement in one direction. A retaining ring in the outer ring holds the bearing together. The retaining ring should not be loaded axially during operation.
| d | 55 mm | Bore diameter |
|---|---|---|
| D | 90 mm | Outside diameter |
| B | 46 mm | Width |
| d1 | ≈ 68.5 mm | Shoulder diameter inner ring |
| D1 | ≈ 78.7 mm | Shoulder diameter outer ring |
| b1 | 4.5 mm | Width annular lubrication groove outer ring |
| K | 3.5 mm | Diameter lubrication hole (outer ring) |
| s | max. 1.5 mm | Permissible axial displacement from the normal position of one bearing ring relative to the other |
| r1,2 | min. 1.1 mm | Chamfer dimension (open bearings) |
| r3,4 | min. 0.6 mm | Chamfer dimension |
Parameter r3.4 has either the value specified here or the same value as r1.2. |
| da | min. 61 mm | Abutment diameter shaft |
|---|---|---|
| das | 64.8 mm | Abutment diameter shaft |
| Da | max. 84 mm | Abutment diameter housing |
| ra | max. 1 mm | Fillet radius |
| rb | max. 0.5 mm | Fillet radius |
| Basic dynamic load rating | C | 190 kN |
|---|---|---|
| Basic static load rating | C0 | 280 kN |
| Fatigue load limit | Pu | 34.5 kN |
| Reference speed | 3 400 r/min | |
| Limiting speed | 4 300 r/min | |
| Minimum load factor | kr | 0.5 |
General bearing specifications
Bearing interfaces
Can't find the information you're looking for? Please fill out the application form and we will reply to you as soon as possible.
Your local AKMI dealer can provide you with technical support and sales assistance.
AKMI online customer service, timely answer customer questions
(Monday to Friday 9:00-18:00)
