Single row full complement cylindrical roller bearings are designed to accommodate very high radial loads in combination with moderate speeds. The bearings incorporate a maximum number of rollers as they are not equipped with a cage. Having two integral flanges on the inner ring and one flange on the outer ring, NCF design bearings can accommodate axial displacement in one direction. A retaining ring on the outer ring holds the bearing together. The retaining ring should not be loaded axially during operation.
| d | 750 mm | Bore diameter |
|---|---|---|
| D | 920 mm | Outside diameter |
| B | 78 mm | Width |
| d1 | ≈ 811 mm | Shoulder diameter inner ring |
| D1 | ≈ 863 mm | Shoulder diameter outer ring |
| E | 880 mm | Raceway diameter outer ring |
| s | max. 8 mm | Permissible axial displacement from the normal position of one bearing ring relative to the other |
| r1,2 | min. 5 mm | Chamfer dimension |
| da | min. 768 mm | Abutment diameter shaft |
|---|---|---|
| das | 802 mm | Abutment diameter shaft |
| Da | max. 902 mm | Abutment diameter housing |
| Db | max. 902 mm | Abutment diameter housing |
| ra | max. 4 mm | Fillet radius |
| Basic dynamic load rating | C | 1 760 kN |
|---|---|---|
| Basic static load rating | C0 | 4 300 kN |
| Fatigue load limit | Pu | 315 kN |
| Reference speed | 240 r/min | |
| Limiting speed | 300 r/min | |
| Calculation factor | kr | 0.1 |
| Limiting value | e | 0.2 |
| Calculation factor | Y | 0.6 |
General bearing specifications
Bearing interfaces
Can't find the information you're looking for? Please fill out the application form and we will reply to you as soon as possible.
Your local AKMI dealer can provide you with technical support and sales assistance.
AKMI online customer service, timely answer customer questions
(Monday to Friday 9:00-18:00)
