Single row full complement cylindrical roller bearings are designed to accommodate very high radial loads in combination with moderate speeds. The bearings incorporate a maximum number of rollers as they are not equipped with a cage. Having two integral flanges on the inner ring and one flange on the outer ring, NCF design bearings can accommodate axial displacement in one direction. A retaining ring on the outer ring holds the bearing together. The retaining ring should not be loaded axially during operation.
| d | 320 mm | Bore diameter |
|---|---|---|
| D | 480 mm | Outside diameter |
| B | 121 mm | Width |
| d1 | ≈ 368 mm | Shoulder diameter inner ring |
| D1 | ≈ 434 mm | Shoulder diameter outer ring |
| E | 449.5 mm | Raceway diameter outer ring |
| s | max. 14 mm | Permissible axial displacement from the normal position of one bearing ring relative to the other |
| r1,2 | min. 4 mm | Chamfer dimension |
| da | min. 335 mm | Abutment diameter shaft |
|---|---|---|
| das | 359 mm | Abutment diameter shaft |
| Da | max. 465 mm | Abutment diameter housing |
| Db | max. 465 mm | Abutment diameter housing |
| ra | max. 3 mm | Fillet radius |
| Basic dynamic load rating | C | 1 980 kN |
|---|---|---|
| Basic static load rating | C0 | 3 450 kN |
| Fatigue load limit | Pu | 310 kN |
| Reference speed | 560 r/min | |
| Limiting speed | 700 r/min | |
| Calculation factor | kr | 0.3 |
| Limiting value | e | 0.3 |
| Calculation factor | Y | 0.4 |
General bearing specifications
Bearing interfaces
Can't find the information you're looking for? Please fill out the application form and we will reply to you as soon as possible.
Your local AKMI dealer can provide you with technical support and sales assistance.
AKMI online customer service, timely answer customer questions
(Monday to Friday 9:00-18:00)
