Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one on the inner ring, NJ design bearings can accommodate axial displacement in one direction. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
| d | 110 mm | Bore diameter |
|---|---|---|
| D | 280 mm | Outside diameter |
| B | 65 mm | Width |
| d1 | ≈ 171 mm | Shoulder diameter of inner ring |
| D1 | ≈ 219.65 mm | Shoulder diameter of outer ring |
| F | 155 mm | Raceway diameter of inner ring |
| r1,2 | min. 4 mm | Chamfer dimension |
| r3,4 | min. 4 mm | Chamfer dimension |
| s | max. 4.8 mm | Permissible axial displacement |
| da | min. 131 mm | Diameter of spacer sleeve |
|---|---|---|
| da | max. 151 mm | Diameter of spacer sleeve |
| db | min. 175 mm | Diameter of shaft abutment |
| Da | max. 260 mm | Diameter of housing abutment |
| ra | max. 3 mm | Radius of fillet |
| Basic dynamic load rating | C | 523 kN |
|---|---|---|
| Basic static load rating | C0 | 585 kN |
| Fatigue load limit | Pu | 64 kN |
| Reference speed | 2 600 r/min | |
| Limiting speed | 3 200 r/min | |
| Minimum load factor | kr | 0.15 |
| Limiting value | e | 0.2 |
| Calculation factor | Y | 0.6 |
| Angle ring | HJ 422 |
General bearing specifications
Bearing interfaces
Can't find the information you're looking for? Please fill out the application form and we will reply to you as soon as possible.
Your local AKMI dealer can provide you with technical support and sales assistance.
AKMI online customer service, timely answer customer questions
(Monday to Friday 9:00-18:00)
