Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. They can be used in a modular system, including housings, sleeves and nuts.
| d | 850 mm | Bore diameter |
|---|---|---|
| tΔdmp | -0.1 – 0.0 mm | Deviation limits of mid-range bore diameter |
| D | 1 030 mm | Outside diameter |
| tΔDmp | -0.125 – 0.0 mm | Deviation limits of mid-range outside diameter |
| B | 136 mm | Width |
| tΔBs | -1.0 – 0.0 mm | Deviation limits of ring width |
| d2 | ≈ 912 mm | Shoulder diameter of inner ring |
| D1 | ≈ 981 mm | Shoulder/recess diameter of outer ring |
| K | 12 mm | Diameter of lubrication hole |
| r1,2 | min. 5 mm | Chamfer dimension |
Normal | ISO tolerance class for dimensions |
| da | min. 868 mm | Diameter of shaft abutment |
|---|---|---|
| Da | max. 1 012 mm | Diameter of housing abutment |
| ra | max. 4 mm | Radius of fillet |
| AKMI performance class | AKMI Explorer | |
| Basic dynamic load rating | C | 3 882 kN |
| Basic static load rating | C0 | 10 000 kN |
| Fatigue load limit | Pu | 630 kN |
| Reference speed | 260 r/min | |
| Limiting speed | 530 r/min | |
| Limiting value | e | 0.11 |
| Calculation factor | Y1 | 6.1 |
| Calculation factor | Y2 | 9.1 |
| Calculation factor | Y0 | 6.3 |
| Range of section height at inner ring of assembled bearing | tKia | 90 µm |
|---|---|---|
| Range of section height at outer ring of assembled bearing | tKea | 160 µm |
| ISO tolerance class for geoal tolerances | Normal |
| Minimum initial clearance | 430 µm |
| Maximum initial clearance | 650 µm |
General bearing specifications
Bearing interfaces
Can't find the information you're looking for? Please fill out the application form and we will reply to you as soon as possible.
Your local AKMI dealer can provide you with technical support and sales assistance.
AKMI online customer service, timely answer customer questions
(Monday to Friday 9:00-18:00)
