Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. They can be used in a modular system, including housings, sleeves and nuts.
| Bore type | Tapered 1:30 |
| d | 800 mm | Bore diameter |
|---|---|---|
| tΔdmp | 0.0 – 0.075 mm | Deviation limits of mid-range bore diameter |
| tΔSL | 0.0 – 0.1 mm | Deviation limits of tapered slope |
| D | 980 mm | Outside diameter |
| tΔDmp | -0.1 – 0.0 mm | Deviation limits of mid-range outside diameter |
| B | 180 mm | Width |
| tΔBs | -0.75 – 0.0 mm | Deviation limits of ring width |
| d2 | ≈ 865 mm | Shoulder diameter of inner ring |
| D1 | ≈ 921 mm | Shoulder/recess diameter of outer ring |
| K | 12 mm | Diameter of lubrication hole |
| r1,2 | min. 5 mm | Chamfer dimension |
Normal | ISO tolerance class for dimensions |
| Da | max. 962 mm | Diameter of housing abutment |
|---|---|---|
| ra | max. 4 mm | Radius of fillet |
| AKMI performance class | AKMI Explorer | |
| Basic dynamic load rating | C | 4 780 kN |
| Basic static load rating | C0 | 12 900 kN |
| Fatigue load limit | Pu | 830 kN |
| Reference speed | 320 r/min | |
| Limiting speed | 560 r/min | |
| Limiting value | e | 0.15 |
| Calculation factor | Y1 | 4.5 |
| Calculation factor | Y2 | 6.7 |
| Calculation factor | Y0 | 4.5 |
| Range of section height at inner ring of assembled bearing | tKia | 80 µm |
|---|---|---|
| Range of section height at outer ring of assembled bearing | tKea | 140 µm |
| ISO tolerance class for geoal tolerances | Normal |
| Minimum initial clearance | 570 µm |
| Maximum initial clearance | 750 µm |
General bearing specifications
Bearing interfaces
Can't find the information you're looking for? Please fill out the application form and we will reply to you as soon as possible.
Your local AKMI dealer can provide you with technical support and sales assistance.
AKMI online customer service, timely answer customer questions
(Monday to Friday 9:00-18:00)
