Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. They can be used in a modular system, including housings, sleeves and nuts.
| d | 670 mm | Bore diameter |
|---|---|---|
| tΔdmp | -0.075 – 0.0 mm | Deviation limits of mid-range bore diameter |
| D | 820 mm | Outside diameter |
| tΔDmp | -0.1 – 0.0 mm | Deviation limits of mid-range outside diameter |
| B | 112 mm | Width |
| tΔBs | -0.75 – 0.0 mm | Deviation limits of ring width |
| d2 | ≈ 724 mm | Shoulder diameter of inner ring |
| D1 | ≈ 778 mm | Shoulder/recess diameter of outer ring |
| K | 9 mm | Diameter of lubrication hole |
| r1,2 | min. 4 mm | Chamfer dimension |
Normal | ISO tolerance class for dimensions |
| da | min. 685 mm | Diameter of shaft abutment |
|---|---|---|
| Da | max. 805 mm | Diameter of housing abutment |
| ra | max. 3 mm | Radius of fillet |
| AKMI performance class | AKMI Explorer | |
| Basic dynamic load rating | C | 2 643 kN |
| Basic static load rating | C0 | 6 400 kN |
| Fatigue load limit | Pu | 430 kN |
| Reference speed | 400 r/min | |
| Limiting speed | 700 r/min | |
| Limiting value | e | 0.11 |
| Calculation factor | Y1 | 6.1 |
| Calculation factor | Y2 | 9.1 |
| Calculation factor | Y0 | 6.3 |
| Range of section height at inner ring of assembled bearing | tKia | 80 µm |
|---|---|---|
| Range of section height at outer ring of assembled bearing | tKea | 140 µm |
| ISO tolerance class for geoal tolerances | Normal |
| Minimum initial clearance | 350 µm |
| Maximum initial clearance | 530 µm |
General bearing specifications
Bearing interfaces
Can't find the information you're looking for? Please fill out the application form and we will reply to you as soon as possible.
Your local AKMI dealer can provide you with technical support and sales assistance.
AKMI online customer service, timely answer customer questions
(Monday to Friday 9:00-18:00)
