Four-row tapered roller bearings can accommodate combined heavy radial and axial loads at low to moderate speeds. They are used almost exclusively in work roll applications such as rolling mills. AKMI manufactures four-row tapered roller bearings in TQO and TQI designs, in many variants and with different features.
| Design variant/feature | TQON/GW |
| Bore type | Cylindrical with helical groove |
| d | 785 mm | Bore diameter |
|---|---|---|
| D | 1 010 mm | Outside diameter |
| B | 600 mm | Total bearing width over inner rings |
| T | 600 mm | Total bearing width over outer rings |
| d1 | ≈ 819 mm | Abutment diameter shaft |
| D1 | ≈ 917 mm | Abutment diameter housing |
| r1,2 | min. 3 mm | Chamfer dimension inner ring |
| r3,4 | min. 6 mm | Outer ring radius (chamfer) |
| AKMI performance class | AKMI Explorer | |
| Basic dynamic load rating | C | 16 600 kN |
| Basic static load rating | C0 | 43 000 kN |
| Fatigue load limit | Pu | 2 700 kN |
| Comparative radial load rating | CF | 4 050 kN |
| Comparative axial load rating | CFa | 922 kN |
| Thrust factor | K | 1.28 |
| Limiting value | e | 0.46 |
| Calculation factor | Y1 | 1.5 |
| Calculation factor | Y2 | 2.2 |
| Calculation factor | Y0 | 1.4 |
General bearing specifications
Bearing interfaces
Can't find the information you're looking for? Please fill out the application form and we will reply to you as soon as possible.
Your local AKMI dealer can provide you with technical support and sales assistance.
AKMI online customer service, timely answer customer questions
(Monday to Friday 9:00-18:00)
