Four-row tapered roller bearings can accommodate combined heavy radial and axial loads at low to moderate speeds. They are used almost exclusively in work roll applications such as rolling mills. AKMI manufactures four-row tapered roller bearings in TQO and TQI designs, in many variants and with different features.
| Design variant/feature | TQO/GWI |
| Bore type | Cylindrical with helical groove |
| d | 584.2 mm | Bore diameter |
|---|---|---|
| D | 762 mm | Outside diameter |
| B | 396.875 mm | Total bearing width over inner rings |
| T | 401.638 mm | Total bearing width over outer rings |
| d1 | ≈ 620 mm | Abutment diameter shaft |
| D1 | ≈ 688 mm | Abutment diameter housing |
| r1,2 | min. 3.3 mm | Chamfer dimension inner ring |
| r3,4 | min. 6.4 mm | Outer ring radius (chamfer) |
| Basic dynamic load rating | C | 7 650 kN |
|---|---|---|
| Basic static load rating | C0 | 22 400 kN |
| Fatigue load limit | Pu | 1 560 kN |
| Comparative radial load rating | CF | 2 040 kN |
| Comparative axial load rating | CFa | 472 kN |
| Thrust factor | K | 1.24 |
| Limiting value | e | 0.48 |
| Calculation factor | Y1 | 1.4 |
| Calculation factor | Y2 | 2.1 |
| Calculation factor | Y0 | 1.4 |
General bearing specifications
Bearing interfaces
Can't find the information you're looking for? Please fill out the application form and we will reply to you as soon as possible.
Your local AKMI dealer can provide you with technical support and sales assistance.
AKMI online customer service, timely answer customer questions
(Monday to Friday 9:00-18:00)
