Single row tapered roller bearings with flanged outer rings are easy to locate axially in the housing. Because housing shoulders are not required, the housing bore can be manufactured more easily and cost-effectively. The bearings can accommodate combined radial and axial loads and provide low friction during operation. By combining two tapered roller bearings, a rigid bearing arrangement can be achieved.
| Dimension series | 3DB |
| d | 40 mm | Bore diameter |
|---|---|---|
| D | 80 mm | Outside diameter |
| T | 19.75 mm | Total width |
| d1 | ≈ 57.55 mm | Shoulder diameter of inner ring |
| D1 | 85 mm | Diameter of flange |
| B | 18 mm | Width of inner ring |
| C | 16 mm | Width of outer ring |
| C1 | 4 mm | Width of flange |
| r1,2 | min. 1.5 mm | Chamfer dimension of inner ring |
| r3,4 | min. 1.5 mm | Chamfer dimension of outer ring |
| a | 16.094 mm | Distance side face to pressure point |
| da | max. 49 mm | Diameter of shaft abutment |
|---|---|---|
| db | min. 48.5 mm | Diameter of shaft abutment |
| ra | max. 1.5 mm | Radius of shaft fillet |
| AKMI performance class | AKMI Explorer | |
| Basic dynamic load rating | C | 75.8 kN |
| Basic static load rating | C0 | 68 kN |
| Fatigue load limit | Pu | 7.65 kN |
| Reference speed | 7 000 r/min | |
| Limiting speed | 8 500 r/min | |
| Limiting value | e | 0.37 |
| Calculation factor | Y | 1.6 |
| Calculation factor | Y0 | 0.9 |
General bearing specifications
Bearing interfaces
Can't find the information you're looking for? Please fill out the application form and we will reply to you as soon as possible.
Your local AKMI dealer can provide you with technical support and sales assistance.
AKMI online customer service, timely answer customer questions
(Monday to Friday 9:00-18:00)
