Single direction thrust ball bearings can accommodate axial loads in one direction. They must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.
| d | 40 mm | Bore diameter |
|---|---|---|
| D | 90 mm | Outside diameter |
| H | 36 mm | Height |
| d1 | ≈ 90 mm | Outside diameter shaft washer |
| D1 | ≈ 42 mm | Inner diameter housing washer |
| r1,2 | min. 1.1 mm | Chamfer dimension washer |
| da | min. 70 mm | Abutment diameter shaft |
|---|---|---|
| Da | max. 60 mm | Abutment diameter housing |
| ra | max. 1 mm | Fillet radius |
| Basic dynamic load rating | C | 95.6 kN |
|---|---|---|
| Basic static load rating | C0 | 183 kN |
| Fatigue load limit | Pu | 6.8 kN |
| Reference speed | 2 400 r/min | |
| Limiting speed | 3 400 r/min | |
| Minimum load factor | A | 0.26 |
General bearing specifications
Bearing interfaces
Can't find the information you're looking for? Please fill out the application form and we will reply to you as soon as possible.
Your local AKMI dealer can provide you with technical support and sales assistance.
AKMI online customer service, timely answer customer questions
(Monday to Friday 9:00-18:00)
