Single direction thrust ball bearings, with sphered housing washer, can accommodate axial loads in one direction. They must not be subjected to any radial load. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit. The sphered housing washers can accommodate initial misalignment when configured correctly with a sphered seat washer or a machine component with a sphered surface.
| d | 35 mm | Bore diameter |
|---|---|---|
| D | 62 mm | Outside diameter |
| H | 19.9 mm | Height |
| H1 | 22 mm | Height bearing including seat washer |
| d1 | ≈ 62 mm | Outside diameter shaft washer |
| D1 | ≈ 37 mm | Inner diameter housing washer |
| D2 | 48 mm | Inner diameter seat washer |
| D3 | 65 mm | Outside diameter seat washer |
| C | 7 mm | Height seat washer |
| R | 50 mm | Radius sphered housing washer |
| s | 24 mm | Centre height housing washer sphere |
| r1,2 | min. 1 mm | Chamfer dimension washer |
| da | min. 51 mm | Abutment diameter shaft |
|---|---|---|
| Da | max. 48 mm | Abutment diameter housing |
| ra | max. 1 mm | Fillet radius |
| Basic dynamic load rating | C | 35.1 kN |
|---|---|---|
| Basic static load rating | C0 | 73.5 kN |
| Fatigue load limit | Pu | 2.7 kN |
| Reference speed | 4 000 r/min | |
| Limiting speed | 5 600 r/min | |
| Minimum load factor | A | 0.028 |
| Seat washer | U 207 |
General bearing specifications
Bearing interfaces
Can't find the information you're looking for? Please fill out the application form and we will reply to you as soon as possible.
Your local AKMI dealer can provide you with technical support and sales assistance.
AKMI online customer service, timely answer customer questions
(Monday to Friday 9:00-18:00)
