Four-point contact ball bearings with seals or shields can accommodate radial, axial and moment loads simultaneously. One bearing series is based on a single cross section which remains constant as the bore diameter increases, leading to significant space and weight savings. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out. The bearings are available with and inch boundary dimensions.
| d | 114.3 mm | Bore diameter |
|---|---|---|
| D | 127 mm | Outside diameter |
| H | 6.35 mm | Radial cross section |
| B | 6.35 mm | Width |
| d1 | ≈ 119.024 mm | Shoulder diameter inner ring |
| d2 | ≈ 118.059 mm | Recess diameter inner ring |
| D1 | ≈ 122.276 mm | Shoulder diameter outer ring |
| D2 | ≈ 123.342 mm | Recess diameter outer ring |
3.175 mm | Ball diameter | |
0.635 mm | Maximum radius of shaft or housing fillet |
| Dynamic load rating, Kaydon, radial direction | CK | 3.6 kN |
|---|---|---|
| Basic static load rating, radial direction | C0 | 6.41 kN |
| Basic static load rating, axial direction | C0a | 16 kN |
| Basic dynamic load rating, moment | CM | 0.163 kN·m |
| Basic static load rating, moment | C0M | 0.386 kN·m |
| Starting torque max. no load | 0.197 N·m | |
| Limiting speed | 550 r/min |
General bearing specifications
Can't find the information you're looking for? Please fill out the application form and we will reply to you as soon as possible.
Your local AKMI dealer can provide you with technical support and sales assistance.
AKMI online customer service, timely answer customer questions
(Monday to Friday 9:00-18:00)
